Thermacore® Model 599

Thermacore Doors | Commercial Products

With a U-factor of .10 (R-value of 17.5), and one of the best overall air infiltration ratings in the industry, the Thermacore® Sectional Steel Door Model 599 is one of the most thermally efficient door systems in its class. The Model 599 doors also carry a Class 26 sound transmission rating for applications where sound suppression is desirable.​

The Thermacore® line features steel-polyurethane-steel panel construction which provides a thermal barrier that withstands extremely hot or cold climates and the most demanding environmental requirements.

thermacore-sectional-door-599-wide

​​​Door Options

  • Chain Hoist or Electric Operator is recommended for doors above 10’ tall or more than 400 pounds
  • Aluminum sash section available up to 24’2″ (7,366 mm) wide
  • Insulated glass, tempered glass, polycarbonate, multi-wall polycarbonate, etc.
  • Four-section pass door
  • High-usage package
  • Wind load options
  • Electric operator
  • Chain hoist
  • Posi-Tension™ drums
  • Safety bottom fixture
  • Bottom-sensing edge
  • Flexible jamb, header seal
  • Exhaust ports​​
  • Impact Section Available​​

​​Colors

Exterior Color

  • white color swatchWhite

​Actual door color may vary slightly from the digital representation above.​ Color samples are available by request through your Overhead Door™ Distributor. ​​​​

​​​​​Features​

  • Standard max width 40’2″ (12,243 mm)
  • Standard max height 32’1″ (9,779 mm)
  • Panel thickness 2″ (51 mm)
  • U-factor*.10
  • R-value** 17.5 (3.09 W/m2)
  • Sound Transmission Class 26 Ideal for applications that require sound control
  • Air infiltration at 15 mph (24 kmph) .08 cfm/ft2 (1.46 m3/hr/m2)
  • *U-factor values are independently tested and verified per ANSI/DASMA 105. **Overhead Door™ uses a calculated door section R-value for our insulated doors.
  • Thermal break PVC
  • Exterior Steel .015″ (.38 mm) galv.
  • Exterior Surface Flush, textured
  • Standard Springs 10,000 cycles
  • Wind Load Designs available for usage in high-wind conditions
  • Warranty 10 year limited delamination 1 year limited on door 3 year/20,000 cycle limited on door & operator system (when purchased together; on material and workmanship) 20 year limited on high performance fluoropolymer coating option

​​*U-factor values are independently tested and verified per ANSI/DASMA 105.
**Overhead Door™ uses a calculated door section R-value for our insulated doors.