Model 511
Aluminum Glass Doors | Commercial Products
Aluminum Glass Door model 511 is designed in sizes up to 16’2″ (4928 mm) wide and 16’1″ high (4902 mm). Featuring a narrow center stile width of 21/32″ (17 mm), these doors are sleek, attractive and permit maximum visibility. An array of glazing choices, top and bottom rail widths, finishes and special options customizes the 511 to satisfy nearly any project requirement.
Your preferred store
Door Options
- Electric operator or chain hoist
- Bottom sensing edge
- 3″ track
- Bracket mounting (not available on full vertical door tracks)
- Higher-cycle springs in 25k, 50k, 75k, 100k cycle
- Exhaust ports
- Finish options: – Bronze anodized – Select from 197 standard powder coat colors or colored to match specification
- Window Glazing Options:
- 1⁄8″ (3 mm) DSB
- 1⁄8″ (3 mm) or 1⁄4″ (6 mm) acrylic
- 1⁄8″ (3 mm) or 1⁄4″ (6 mm) tempered
- 1⁄8″ (3 mm) or 1⁄4″ (6 mm) clear polycarbonate
- 1/4” (6 mm) and 3/8” (10 mm) multi-wall polycarbonate
- 1⁄4″ (6 mm) wire glass
- 1⁄2″ (12 mm) insulated glass
Colors
Select from 197 standard powder coat colors or colored to match specification.
Features
- Standard max width 16’2″ (4928 mm)
- Standard max height 16’1″ (4902 mm)
- Panel thickness 1 3/4″ (45 mm)
- Material 6063-T6 aluminum
- Standard finish 204R-1 clear anodized
- Center stile width 21/32″ (17 mm)
- End stile width 2 3/4″ (70 mm)
- Top rail width 2 3/8″ (60 mm)or 3 3/4″ (95 mm)
- Top intermediate rail width 3/4″ (19 mm)
- Bottom intermediate rail width 5/8″ (16 mm)
- Bottom rail width 2 3/8″ (60 mm) or 3 3/4″ (95 mm) or 4 1/2″ (114 mm)
- Weatherseals Bottom, flexible PVC
- Standard springs 10,000 cycle
- Track 2″ (51 mm)
- Mounting Angle
- Operation Manual pull rope
- Hinges and fixtures Galvanized steel
- Lock Galvanized, interior-mounted single unit
