Thermacore® Model 515
Wind Load | Commercial Products
Thermacore® Wind Load Door Model 515 is engineered to withstand higher design pressures and is designed to meet local building codes for wind speed. constructed of steel and polyurethane insulation, this insulated wind load sectional door boasts an U-factor of .15 (R-value of 12.12).
Your preferred store
Door Options
- Jamb Seal
- 3″ Track
- High Cycle Springs – 25k, 50k, 100k
- Factory Glazed Windows
Colors
Exterior Colors
White
Almond
Taupe
Brown
Black*
Optional wood grain finishes
Wood grain option available
Golden Oak
Walnut
Mission Oak
Actual door color may vary slightly from the digital representation above. Color samples are available by request through your local Overhead Door™ Distributor. *Overhead Door™ Corporation does not warrant this product with black finish against warping, rubbing, or other issues associated with thermal bowing. Black finish is not recommended for areas that experience high heat and/or high UV conditions.
Features
- Standard max width 20’2″
- Standard max height 20’1″
- U-factor*
.15 - R-value** 12.12
- Thermal Break Yes
- Air Infiltration 0.23 cfm/ft2 at 15mph
- Panel Thickness 1 3/8″
- *U-factor values are independently tested and verified per ANSI/DASMA 105. **Overhead Door™ uses a calculated door section R-value for our insulated doors.
- Exterior Steel 0.015″ (0.35mm)
- Exterior Surface Embossed wood grain finish or microgroove textured
- Standard Springs 10,000 cycles
- Sound Transmission Class 20
- Wind Load Minimum standard
- Warranty 10 years against cracking, splitting or deterioration due to rust-through. 10 years delamination.
*U-factor values are independently tested and verified per ANSI/DASMA 105.
**Overhead Door™ uses a calculated door section R-value for our insulated doors.
